Taipei, Taiwan (Tech Messenger) -- PLANET Technology Corporation today announces the new state-of-the-art 24-Port 100Base-FX + 2-Gigabit Web/Smart Switch (FGSW-2624SF). The PLANET FGSW-2624SF is equipped with 24-Port 100Base-FX SFP (Small Factor Pluggable) ports and 2 Gigabit TP/SFP combo ports (Port 25, 26). The 24 100Base-FX SFP ports are with high reliability and flexibility to extend the distance up to 2Km, 20Km, or longer. It depends on the 100Base-FX SFP transceiver modules. And the two Gigabit TP/SFP combo ports can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP.
The FGSW-2624SF is designed for the applications, such as FTTx installation for ISPs, Campuses and enterprises. The fiber-Optic wires on the basis of distance are flexibly provided. Therefore, the product will perfectly satisfy the diverse demands while providing reliable and efficient network solutions based on the distance and budgets of installation.
The FGSW-2624SF is equipped with non-blocking 8.8Gbps backplane greatly simplifies the tasks for upgrading your LAN to cater increased bandwidth demands.
For efficient management, the FGSW-2624SF Web Smart Switch is equipped with web interface. The FGSW-2624SF can be programmed for basic functions of switch management, such as port speed configuration, Port Trunking, VLAN, Port Mirroring, QoS, bandwidth control, Access Control list and Misc Configuration.
The FGSW-2624SF provides port-based VLAN (including overlapping) and 802.1Q Tag-based VLAN. The VLAN groups allowed the FGSW-2624SF to be maximal up to 26 for port-based VLAN. Via supporting port trunking, the FGSW-2624SF allows the operation of high-speed trunk combining multiple ports. The FGSW-2624SF provides seven groups which is up to 8-ports for trunking and it supports fail-over as well.
Key Features
- Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard
-24-Port 100Base-FX SFP Fast Ethernet Switch
-2-Port Gigabit TP/SFP combo ports
-Each Switching ports support auto-negotiation200Mbps
-Auto-MDI/MDI-X detection on each RJ-45 port
-Prevents packet loss with back pressure (Half-Duplex) and 802.3x PAUSE frame Flow Control (Full-Duplex)
-High performance Store-and-Forward architecture, broadcast storm control, and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
-8K MAC address table, automatic source address learning
-512K Bytes packet buffer
-Web interface of basic management for Switch to setup
-Supports up to 26 port-based VLAN groups
-Supports IEEE 802.1Q Tagged VLAN
-Supports up to 7 Trunk groups, and each trunk is up to maximum 8 port with 800Mbps bandwidth
-Port mirroring allows monitoring the traffic across any port in real time
-Supports QoS and bandwidth control on each port
-Supports Access Control List function
-19-inch of rack mount
-Internal full-range power supply suitable for worldwide use
-EMI standards comply with FCC, CE class A
Application
FTTx Node Switch
With 24 100Base-FX SFP ports and 2 Gigabit TP/SFP combo ports, the switch provides a cost-effective, high-performance for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building) for enterprise, the various distances of SFP (small-form factor) and Bidi (WDM) transceivers are optional for customers. Comparing with traditional fiber switch that equipped fixed distance (2Km) and connection mode (SC only), the 24 SFP ports provides flexible solution for ISPs and enterprises. In addition, the 2 gigabit TP/SFP combo ports can be used as uplink port which connects to the data centers and backbones.
MTU Switch
In an MTU (Multi Tenant Unit) /MDU (Multi Dwelling Unit) application, the advanced functionality of the FGSW-2624SF eliminates traditional problems associated with Ethernet. Using the built-in VLAN functionality can segregate users. This coupled with the flexible fiber module options makes the FGSW-2624SF be one of the best cost-effective switch solutions for multi-tenant service providers.
Backbone Switch
With up to 8.8 Gigabits per second of non-blocking switch fabric, the switch can easily provide the high bandwidth required now and in the future. With the two Gigabit TP/SFP combo ports, the FGSW-2624SF provides the uplink to the core network through Gigabit Ethernet SX/LX modules.
Specification
Product: FGSW-2624SF
Hardware Specification:
Ports: 24 100Base-FX SFP ports
Module Slots: 2 Gigabit TP/SFP combo ports
Switch Processing Scheme: Store-and-forward
Throughput (packet per second): 6.547Mpps
Switch fabric: 8.8Gbps
Address Table: 8K entries
Share data Buffer: 512K Bytes
Flow Control: Back pressure for Half-Duplex, IEEE 802.3x Pause Frame for Full-Duplex
Dimensions: 440 x 220 x 44 mm, 1U height
Weight: 2.6kg
Power Requirement: 100~240V AC, 50-60 Hz
Power Consumption / Dissipation: 23.1 Watts maximum / 73 BTU/hr maximum
Temperature: Operating; 0~50 degree C, Storage -40~70 degree C
Humidity Operating: 10% to 90%, Storage: 5% to 95% (Non-condensing)
Layer 2 function:
System Configuration: Web interface
Port Status: Display the speed duplex mode, flow control status, disable/enable and link status of per port
Port Configuration: Disable/enable per port, auto-negotiation disable/enable. Flow control disable/enable and bandwidth control on each port
Trunk Configuration: Supports 7 groups of 8-Port trunk
VLAN Configuration: IEEE 802.1Q Tag-Based VLAN: Port-based VLAN supports maximum up to 26 VLAN groups
Port Monitoring: One Mirroring port to monitor one mirrored port. The monitor modes are RX, TX and RX & TX
QoS Configuration: IEEE 802.1p QoS on each port
Port counters: Display detail traffic counters on each port
Access Control List: Supports up to 16 Access group of control list
Standards Conformance:
Regulation Compliance: FCC Part 15 Class A, CE
Standards Compliance: IEEE 802.3 (Ethernet): IEEE 802.3u (Fast Ethernet): IEEE 802.3ab (Gigabit Ethernet): IEEE 802.3z (Gigabit Ethernet): IEEE 802.3x (Full-duplex Flow Control): IEEE 802.1p QoS: IEEE 802.1Q Tag-Based VLAN
Ordering Information
FGSW-2624SF: 24-Port 100Base SFP +2 Gigabit TP/SFP Combo Ports Web Smart Ethernet Switch
Available modules for FGSW-2624SF 100Base-FX SFP Slots
MFB-FX: SFP-Port 100Base-FX Transceiver (1310nm) -2KM
MFB-F20: SFP-Port 100Base-FX Transceiver (1310nm) - 20KM
MFB-FA20: SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm) -20KM
MFB-FB20: SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm) -20KM
Available modules for FGSW-2624SF 1000Base-SX/LX SFP Slots
MGB-GT: SFP-Port 1000Base-T mini-GBIC module
MGB-SX: SFP-Port 1000Base-SX mini-GBIC module
MGB-LX: SFP-Port 1000Base-LX mini-GBIC module
MGB-L30: SFP-Port 1000Base-LX mini-GBIC module -30KM
MGB-L50: SFP-Port 1000Base-LX mini-GBIC module -50KM
MGB-L70: SFP-Port 1000Base-LX mini-GBIC module -70KM
MGB-L120: SFP-Port 1000Base-LX mini-GBIC module -120KM
MGB-LA10: SFP-Port 1000Base-LX mini-GBIC module- LC WDM(TX:1310nm), SM,10km
MGB-LB10: SFP-Port 1000Base-LX mini-GBIC module- LC WDM(TX:1550nm), SM,10km
MGB-LA20: SFP-Port 1000Base-LX mini-GBIC module- LC WDM(TX:1310nm), SM,20km
MGB-LB20: SFP-Port 1000Base-LX mini-GBIC module- LC WDM(TX:1550nm), SM,20km
MGB-LA40: SFP-Port 1000Base-LX mini-GBIC module- LC WDM(TX:1310nm), SM,40km
MGB-LB40: SFP-Port 1000Base-LX mini-GBIC module- LC WDM(TX:1550nm), SM,40km
Longer distance modules (up to 120km) are available upon request.
URL:
http://www.planet.com.tw
